switchs_hp

Différences

Ci-dessous, les différences entre deux révisions de la page.

Lien vers cette vue comparative

Dernière révisionLes deux révisions suivantes
switchs_hp [2016/06/30 11:42] – créée dmaxswitchs_hp [2016/06/30 11:42] dmax
Ligne 5: Ligne 5:
 Voici la liste des commandes importantes : Voici la liste des commandes importantes :
  
-LOG  +  * LOG  
-log Display log events (most recent last) +  log Display log events (most recent last) 
-log -r Display log events (most recent first) +  log -r Display log events (most recent first) 
-log A12 Display log events of port a12 +  log A12 Display log events of port a12 
-log A12 -r Display log events of port a12 (most recent first) +  log A12 -r Display log events of port a12 (most recent first) 
-log 192.168.0.1 Display log events of 192.168.0.1 +  log 192.168.0.1 Display log events of 192.168.0.1 
-MAC  +  MAC  
-show mac A5 Show MAC-address of the device on port A5 +  show mac A5 Show MAC-address of the device on port A5 
-show mac A4-A6 Show MAC-adresss of the devices on ports between A4 and A6 +  show mac A4-A6 Show MAC-adresss of the devices on ports between A4 and A6 
-show mac 00112233-445566 Show which port device with MAC-address 00112233-445566 is connected +  show mac 00112233-445566 Show which port device with MAC-address 00112233-445566 is connected 
-VLAN  +  VLAN  
-show vlan Show information about vlans on this swtich +  show vlan Show information about vlans on this swtich 
-show vlan ports A19 Show VLAN ID and status of specific ports (A19) +  show vlan ports A19 Show VLAN ID and status of specific ports (A19) 
-show vlan Show ports on this vlan and port status +  show vlan Show ports on this vlan and port status 
-configure  +  configure  
-vlan 19 Set switch to vlan 19 +  vlan 19 Set switch to vlan 19 
-name SupportVLAN Name this vlan as “SupportVLAN” +  name SupportVLAN Name this vlan as “SupportVLAN” 
-tag A12 Set port a12 as tagged on vlan 19 (First do vlan <19>+  tag A12 Set port a12 as tagged on vlan 19 (First do vlan <19>
-tag A12,A13 Set ports a12 and 13 tagged on vlan 19 (First do vlan <19>+  tag A12,A13 Set ports a12 and 13 tagged on vlan 19 (First do vlan <19>
-untag A12 Set port a12 as untagged on vlan 19 +  untag A12 Set port a12 as untagged on vlan 19 
-vlan 19 tagged A12 Set port a12 as tagged on vlan 19 +  vlan 19 tagged A12 Set port a12 as tagged on vlan 19 
-vlan 19 untagged A12 Set port a12 as untagged on vlan 19 +  vlan 19 untagged A12 Set port a12 as untagged on vlan 19 
-vlan 19 untagged A12-A20 Set port a12-a20 as untagged on vlan 19 +  vlan 19 untagged A12-A20 Set port a12-a20 as untagged on vlan 19 
-no vlan 30 Remove vlan setting on port 30 +  no vlan 30 Remove vlan setting on port 30 
-FLASH  +  FLASH  
-show flash Displays info about flash (version etc.) +  show flash Displays info about flash (version etc.) 
-copy running-config tftp filename.txt Copy your running config to file filename.txt at tftp server which IP is . +  copy running-config tftp filename.txt Copy your running config to file filename.txt at tftp server which IP is . 
-copy tftp startup 192.168.0.2 hp_2524 Copy your config (filename hp2524) from server 192.168.0.2 via tftp to switch +  copy tftp startup 192.168.0.2 hp_2524 Copy your config (filename hp2524) from server 192.168.0.2 via tftp to switch 
-copy tftp flash file.swi Download and update your flash with file.swi from tftp server at +  copy tftp flash file.swi Download and update your flash with file.swi from tftp server at 
-MISC  +  MISC  
-copy flash flash secondary Copy software from primary to secondary image is not intuitive +  copy flash flash secondary Copy software from primary to secondary image is not intuitive 
-copy flash flash primary Updated secondary image first then You could copy from secondary to primary +  copy flash flash primary Updated secondary image first then You could copy from secondary to primary 
-hostname poro_1 Set switch hostname as poro_1 +  hostname poro_1 Set switch hostname as poro_1 
-link-test 00112233-445566 Test connectivity between switches (this switch and 00112233-445566) +  link-test 00112233-445566 Test connectivity between switches (this switch and 00112233-445566) 
-show run Show running config +  show run Show running config 
-password operator Set operator password (Normal user / read-only ) +  password operator Set operator password (Normal user / read-only ) 
-password manager Set manager password (Admin user / read-write) +  password manager Set manager password (Admin user / read-write) 
-password all Set operator and manager password +  password all Set operator and manager password 
-enable Switch to manager lever from operator level +  enable Switch to manager lever from operator level 
-ping 192.168.0.1 Ping IP 192.168.0.1 +  ping 192.168.0.1 Ping IP 192.168.0.1 
-chassislocate Turn on/off switch locator led or blink it (30 minutes) +  chassislocate Turn on/off switch locator led or blink it (30 minutes) 
-chassislocate blink 10 Blink switch locator led 10 minutes +  chassislocate blink 10 Blink switch locator led 10 minutes 
-ntp1 first.timeserver.net Add first.timeserver.net to NTP server list +  ntp1 first.timeserver.net Add first.timeserver.net to NTP server list 
-timesync ntp Enable NTP syncronization with servers +  timesync ntp Enable NTP syncronization with servers 
- +   
-PROMPT  +  PROMPT  
-Switch# Manager prompt +  Switch# Manager prompt 
-Switch>_ Operator prompt+  Switch>_ Operator prompt
  • switchs_hp.txt
  • Dernière modification : 2017/08/25 09:56
  • de 127.0.0.1