Différences
Ci-dessous, les différences entre deux révisions de la page.
Prochaine révision | Révision précédente | ||
switchs_hp [2016/06/30 11:42] – créée dmax | switchs_hp [2017/08/25 09:56] (Version actuelle) – modification externe 127.0.0.1 | ||
---|---|---|---|
Ligne 5: | Ligne 5: | ||
Voici la liste des commandes importantes : | Voici la liste des commandes importantes : | ||
- | LOG | + | * LOG |
- | log Display log events (most recent last) | + | |
- | log -r Display log events (most recent first) | + | |
- | log A12 Display log events of port a12 | + | |
- | log A12 -r Display log events of port a12 (most recent first) | + | |
- | log 192.168.0.1 Display log events of 192.168.0.1 | + | |
- | MAC | + | |
- | show mac A5 Show MAC-address of the device on port A5 | + | |
- | show mac A4-A6 Show MAC-adresss of the devices on ports between A4 and A6 | + | |
- | show mac 00112233-445566 Show which port device with MAC-address 00112233-445566 is connected | + | |
- | VLAN | + | |
- | show vlan Show information about vlans on this swtich | + | |
- | show vlan ports A19 Show VLAN ID and status of specific ports (A19) | + | |
- | show vlan Show ports on this vlan and port status | + | |
- | configure | + | |
- | vlan 19 Set switch to vlan 19 | + | |
- | name SupportVLAN Name this vlan as “SupportVLAN” | + | |
- | tag A12 Set port a12 as tagged on vlan 19 (First do vlan < | + | |
- | tag A12,A13 Set ports a12 and 13 tagged on vlan 19 (First do vlan < | + | |
- | untag A12 Set port a12 as untagged on vlan 19 | + | |
- | vlan 19 tagged A12 Set port a12 as tagged on vlan 19 | + | |
- | vlan 19 untagged A12 Set port a12 as untagged on vlan 19 | + | |
- | vlan 19 untagged A12-A20 Set port a12-a20 as untagged on vlan 19 | + | |
- | no vlan 30 Remove vlan setting on port 30 | + | |
- | FLASH | + | |
- | show flash Displays info about flash (version etc.) | + | |
- | copy running-config tftp filename.txt Copy your running config to file filename.txt at tftp server which IP is . | + | |
- | copy tftp startup 192.168.0.2 hp_2524 Copy your config (filename hp2524) from server 192.168.0.2 via tftp to switch | + | |
- | copy tftp flash file.swi Download and update your flash with file.swi from tftp server at | + | |
- | MISC | + | |
- | copy flash flash secondary Copy software from primary to secondary image is not intuitive | + | |
- | copy flash flash primary Updated secondary image first then You could copy from secondary to primary | + | |
- | hostname poro_1 Set switch hostname as poro_1 | + | |
- | link-test 00112233-445566 Test connectivity between switches (this switch and 00112233-445566) | + | |
- | show run Show running config | + | |
- | password operator Set operator password (Normal user / read-only ) | + | |
- | password manager Set manager password (Admin user / read-write) | + | |
- | password all Set operator and manager password | + | |
- | enable Switch to manager lever from operator level | + | |
- | ping 192.168.0.1 Ping IP 192.168.0.1 | + | |
- | chassislocate Turn on/off switch locator led or blink it (30 minutes) | + | |
- | chassislocate blink 10 Blink switch locator led 10 minutes | + | |
- | ntp1 first.timeserver.net Add first.timeserver.net to NTP server list | + | |
- | timesync ntp Enable NTP syncronization with servers | + | |
- | + | | |
- | PROMPT | + | |
- | Switch# Manager prompt | + | |
- | Switch>_ Operator prompt | + | |